Stopping/Restarting Chiller Operation; Stopping The Chiller - Trane AdaptiView Operation Manual

Stopping/Restarting Chiller Operation

You can start or stop the chiller from the AdaptiView display by using the Auto and Stop buttons.
The buttons are located in upper right

Stopping the Chiller

You can stop the chiller in two ways:
•
•
To stop the chiller in either of these ways:
1. Touch the Stop button to initiate the chiller shutdown process. A confirmation screen appears
Figure 4. Stop the Chiller confirmation screen
14
Normally, which involves stopping the various components sequentially in order to protect
them from damage
Immediately, which shuts down all the components at once, and should be used only in an
emergency
(Figure 4).
(Figure 1, p. 7).
CTV-SVU02A-EN