Techview - Trane CGAM Installation & Operation Manual

Controls Interface

TechView

TechView is the PC (laptop) based tool used for servicing Tracer CH530. Technicians that make any
chiller control modification or service any diagnostic with Tracer CH530 must use a laptop running
the software application "TechView. " TechView is a Trane application developed to minimize chiller
downtime and aid the technicians understanding of chiller operation and service requirements.
Note: Important: Performing any Tracer CH530 service functions should be done only by a
TechView software is available via Trane.com.
(http://www.trane.com/Commercial/DesignAnalysis/TechView.aspx)
This download site provides a user the TechView installation software and CH530 main processor
software that must be loaded onto your PC in order to service a CH530 main processor. The
TechView service tool is used to load software into the Tracer CH530 main processor.
Minimum PC requirements to install and operate TechView
126
properly trained service technician. Please contact your local Trane service agency for
assistance with any service requirements.
• Microsoft Windows XP Professional, Windows Vista Business or Windows 7 Enterprise
operating system
• Internet Explorer 6.0 or higher
CG-SVX17D-EN