Software Requirements
Hardware Requirements
62
TechView Service Tool
Tracer CH530 is a new chiller controller technology developed by Trane for use on
large chiller products and is serviced with a PC (laptop)-based tool. Technicians
that make any chiller control modification or service any diagnostic with Tracer
CH530 must use a laptop running the software application "TechView. " TechView
is a Trane application developed to minimize chiller downtime and aid the
technicians' understanding of chiller operation and service requirements.
The TechView service tool is used to load software into the Tracer CH530 main
processor (DynaView or EZView). TechView is also used to perform CH530
service and maintenance functions. Servicing a CH530 main processor includes:
•
Updating main processor software
•
Monitoring chiller operation
•
Viewing and resetting chiller diagnostics
•
Low Level Intelligent Device (LLID) replacement and binding
•
Main processor replacement and configuration modifications
•
Setpoint modifications
•
Service overrides
TechView is available for download on Trane.com at no cost. Minimum Laptop
requirements are listed below. The version of TechView will be updated
periodically and laptop requirements may change. Please refer to Trane.com for
the latest information.
TechView software versions are available from the TechView Software Download
page. A new installation requires two software applications: Java Runtime
Environment (JRE) and TechView itself.
Tracer CH530 main processor software versions are available from the Tracer
CH530 Main Processor Download page. Main processor software is unique per
product family.
Specific hardware requirements have been established for service technician laptops
that will be using TechView with Tracer CH530.
RLC-SVD05A-EN