Method Three:
Step 1:
Keep the default WPS Status as Enabled and click the Add device button in Figure 4-5,
then the following screen will appear.
Step 2:
Choose "Press the button of the new device in two minutes" and click Connect.
Step 3:
For the configuration of the wireless adapter, please choose "Push the button on my
access point or wireless router" in the configuration utility of the WPS as below, and
click Next.
TL-WA801ND
The WPS Configuration Screen of Wireless Adapter
Figure 4-6 Add A New Device
300Mbps Wireless N Access Point User Guide
19