TP-Link TD-W8961ND User Manual page 39

TD-W8961ND
•
Extension Channel: If "20/40 MHz" is selected, this option will be displayed.
•
Guard Interval: Select the guard interval you want from the drop-down list.
•
MCS: Select the wireless transmission rate from the drop-down list. By default, the
option is AUTO.
Multiple SSIDs Settings: These are the settings of the SSID.
•
SSID Index: The index of the SSID, and in this model, you can only leave it as a default
value of 1.
•
Broadcast SSID: When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. To broadcast the
Router's SSID, keep the default setting. If you don't want to broadcast the Router's SSID,
select "No".
•
Use WPS: Use WPS (Wi-Fi Protected Setup) function, you can add a new wireless
device to an existing network quickly. To Use WPS, keep the default setting, and
configure the parameters in WPS Settings. If you don't want to Use WPS, select "No",
then you will see the screen as shown below.
•
SSID: Wireless network name shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not
exceed 32 characters (use any of the characters on the keyboard). Make sure this
setting is the same for all stations in your wireless network. Type the desired SSID in the
space provided.
•
Authentication Type: Select an authentication type from the drop-down list, which
allows you to configure security features of the wireless LAN interface. Options available
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/
WPA2-PSK.
1) WEP- 64Bits
To configure WEP-64Bits settings, select the WEP-64Bits option from the drop-down list. The
menu will change to offer the appropriate settings. WEP-64Bits is a data privacy mechanism
based on a 64-bit shared key algorithm, as described in the IEEE 802.11g standard.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-15
31