Interface Setup; Internet - TP-Link TD-W8961ND User Manual

TD-W8961ND

4.3 Interface Setup

Choose "Interface Setup", you can see the next submenus: Internet and LAN.
Click any of them, and you will be able to configure the corresponding function.

4.3.1 Internet

Choose "Interface Setup→Internet" menu, you can configure the parameters for WAN ports in
the next screen (shown in Figure 4-6).
ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path
Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup
8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You
need to activate the VC to take effect. For PVCs management, you can use ATM QoS to
setup each PVC traffic line's priority.
•
Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-5
Figure 4-6
20
Back to LED Explanation