Table of Contents
Advertisement
VIVOTEK
Media > Image
Advanced Mode
This section explains how to configure the image settings of the Network Camera. It is
composed of the following four tabbed menus: General settings, Preference, Exposure, and
Privacy mask.
General settings
Timestamp and video title: Enter a name that will be displayed on the title bar of the live video as the
picture shown below.
Video Title
Video (TPC-AV)
2011/03/13 17:08:56
Title and Time
Video 17:08:56 2011/03/13
Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display
of the live video. Select both options if the Network Camera is installed upside-down (e.g., on the ceiling)
to correct the image orientation. Please note that the preset locations will be cleared after you change
the flip/mirror setting.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
User's Manual - 67
Advertisement
Table of Contents
