Vivotek SD8362E User Manual page 63

Network camera
Hide thumbs Also See for SD8362E:
Table of Contents

Advertisement

Network > DDNS
This section explains how to configure the dynamic domain name service for the Network
Camera. DDNS is a service that allows your Network Camera, especially when assigned with a
dynamic IP address, to have a fixed host and domain name.
Express link
Express Link is a free service provided by VIVOTEK server, which allows users to register a
domain name for a network device. One URL can only be mapped to one MAC address. This
service will check out if the host name is valid and automatically open a port on your router.
Unlike DDNS, the user has to manually check out UPnP port forwarding, Express Link is more
convenient and easy to set up.
Please follow the steps below to enable Express Link:
1. Make sure that your router supports UPnP port forwarding and it is activated, or you may see the
following warning message:
2. Check Enable express link.
3. Enter a host name for the network device and click Save. If the host name has been used by another
device, a warning message will show up. If the host name is valid, it will show a message as shown
below.
https://0002D1123456.2bthere.net
"Express link is not supported under current network
VIVOTEK
environment."
User's Manual - 63

Advertisement

Table of Contents
loading

Table of Contents