Table of Contents
Advertisement
VIVOTEK
Day/Night Settings
The Day/Night related settings has been moved to the Exposure page. A hyperlink is provided instead.
Refer to the following discussions for its details.
Preference
On this page, you can tune the White balance, Image adjustment and individual image profile settings.
You can configure two sets of preference settings: one for normal situations, the other for special
situations, such as day/night/schedule mode.
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations
White balance: Adjust the value for the best color temperature.
■ Auto: It will automatically adjust the color temperature of the light in response to different light sources.
You may follow the steps below to adjust the white balance to the best color temperature.
1. Set the White balance to Auto.
2. Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color
temperature automatically.
3. Check Fix current value to confirm the setting while the white balance is being measured.
■ Manual: This item allows user to input the R gain & B gain values manually.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. Please note that this function will
be disabled if you enable WRD enhancement in the column below.
68 - User's Manual
Advertisement
Table of Contents
