Network Deployment 13; Setting Up The Network Camera Over The Internet - Vivotek FE8172V User Manual

Network Deployment

Setting up the Network Camera over the Internet

There are several ways to set up the Network Camera over the
up the Network Camera behind a
to use PPPoE.
Internet connection via a router
Before enabling the access to the Network Camera over the Internet, make sure you have a
router and follow the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 18 for
details.
Internet
Cable or DSL Modem
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ Secondary HTTP port: 8080
■ RTSP port: 554
■ RTP port for audio: 5558
■ RTCP port for audio: 5559
■ RTP port for video: 5556
■ RTCP port for video: 5557
If you have changed the port numbers on the Network page, please open the ports
accordingly on your router. For information on how to forward ports on the router, please refer
to your router's user's manual.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 66 for details.
router. The second way is to utilize a static
WAN (Wide Area Network )
Router IP address : from ISP Router IP address : from ISP
LAN (Local Area Network) LAN (Local Area Network)
Router IP address : 192.168.0.1 Router IP address : 192.168.0.1
Internet. The first way is to set
IP. The third way is
IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
VIVOTEK
User's Manual - 15