Set Server Parameter Values - Vivotek FE8172V User Manual

VIVOTEK

6. Set Server Parameter Values

Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
PARAMETER VALUE
<group>_<name> value to assigned
update <boolean>
<return page>
return
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
130 - User's Manual
DESCRIPTION
Assign <value> to the parameter <group>_<name>.
Set to 1 to update all fields (no need to update parameter in
each group).
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
(Note: The return page can be a general HTML file (.htm, .html)
or a VIVOTEK server script executable (.vspx) file. It cannot be
a CGI command or have any extra parameters. This parameter
must be placed at the end of the parameter list