Viessmann VITOCAL 300-G Operating Instructions Manual page 35

Setting the time program for DHW circulation...
! ?
Time prog. DHW circulat. Mo-Su
0 2 4 6 8 10 12 14 16 18 20 22 24
! 06:00 - 09:00 u
? 11:00 - 13:00 u
Continue
Note
The DHW circulation pump remains off
in between time phases.
Example:
You want to set the same time program
for every day except Monday:
Select the period "Monday–Sunday"
and set the time program.
Then select "Monday" and set the time
program for this.
Note
If you want to terminate the setting proc-
ess prematurely, keep pressing
the required display appears.
Deleting a time phase
■ Set the time for the end point to the
same time that was set for the start
point,
or
■ For the start time, select a time prior to
00:00 h.
The display shows the selected time
§
phase "- - : - -".
Time prog. DHW circulat. Mo-Su
ON
0
? - -:- - - -:- -
5/10 cyc.
OK § - -:- - - - -:- -
Operating status for DHW circulation
pump
The different operating statuses indicate
when the DHW circulation pump runs.
"5/25 cyc."
The DHW circulation pump starts twice
per hour for 5 min (pause duration 25
min).
"5/10 cyc."
until
The DHW circulation pump starts four
times per hour for 5 min (pause duration
10 min).
"ON"
The DHW circulation pump runs con-
stantly.
DHW heating
(cont.)
2 4 6 8 10 12 14 16 18 20 22 24
---
u
---
u
Change with
(
35