When the power of the optical disk drive is off, pressing the Fn + Tab keys
will turn the power of the optical disk drive on. Furthermore, it is possible to
set it to turn the power of the optical disk drive on and eject the tray at the
same time.
Loading discs
To load CD/DVDs, follow the steps below and refer to figures 4-6 to 4-9.
1. When the computer's power is on, press the eject button to open
the disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
User's Manual
Figure 4-6 Pressing the eject button
Figure 4-7 Pulling the disc tray open
Operating Basics
Eject button
Disc tray
4-13