Turning On The Power - Toshiba TECRA M5 User Manual

2. While holding down the palm rest with one hand so that the main body
is not raised, lift the panel slowly. Adjust the angle of the panel to
provide optimal clarity.
Use reasonable care when opening and closing the LCD display panel.
Opening it vigorously or slamming it shut could damage the computer.

Turning on the power

This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
section in Chapter 6, Power and Power-Up Modes.
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section
the first
■
If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
1. Open the computer's LCD display panel.
2. Press and hold the computer's power button for two or three seconds.
Power button
User's Manual
LCD display panel
Figure 3-5 Opening the LCD display panel
time.
Figure 3-6 Turning on the power
Getting Started
Display latch
Power indicators
Starting up for
3-9