Utilities - Toshiba TECRA M5 User Manual

Introduction
The HDD Protection function does not guarantee that the hard disk drive
will not be damaged.
Hibernation
Standby

Utilities

This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility's online manual, help files or
readme.txt files.
TOSHIBA Power
Saver
HW Setup
TOSHIBA Controls
1-14
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk, when you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power
Getting Started, for details.
If you have to interrupt your work, you can turn off
the power without exiting from your software.
Data is maintained in the computer's main
memory. When you turn on the power again, you
can continue working right where you left off.
To access this power savings management
program, click start, click Control Panel, click
Performance and Maintenance and click the
TOSHIBA Power Saver icon.
This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, To access this utility, click start, click
Control Panel, click Printers and Other
Hardware and click the TOSHIBA HWSetup
icon.
This utility have a section to let you do the
following:
■ Buttons: Assign applications or functions to
the TOSHIBA Presentation button (default
setting is the simultaneous display on LCD
and CRT with resolution of 1024 × 768) and
to the TOSHIBA Assist button (default setting
is the TOSHIBA Assist).
section in Chapter 3,
User's Manual