Sunbeam PLANETARY MIXMASTER MX9200 Instruction/Recipe Booklet page 9

Using your Café Series
continued
4. Place the bowl on the base with the handle
facing you. Then gently rotate the bowl
in a clockwise direction until it locks into
position (Fig 3). The bowl should feel firm
with no movement.
5. Lower the mixer head with the selected
mixing attachment in place into the mixing
bowl. Press the 'head release' button to
un-lock it from its position and ease the
mixer head down (Fig. 4).
Figure 5
6. The splashguard can now be placed over
the bowl if desired (Fig 5).
Planetary Mixmaster
®
Using your Planetary Mixmaster
1. Position the mixer on a level, dry
2. Plug the power cord into a 230/240 Volt
3. A beep will sound and the LCD screen
Figure 4
4a. If using the splashguard, add ingredients
4b. If using the mixer without the
5. Turn the speed control dial clockwise to
Figure 6
Bench Mixer
®
surface such as a bench top. Ensure the
mixing bowl is in place and the desired
attachment is inserted.
AC power outlet.
will light up to inform you that the mixer
is now switched on. The LCD screen
will flash three times and the timer will
display "00:00". The screen will also
display the speed setting. If the LCD
displays a speed setting other than "0"
and continues to flash, you may turn the
speed control dial anti-clockwise to the
"0" position to re-set the speed setting.
to the mixing bowl through the pouring
shoot.
splashguard, release the mixer head
out of its locked position and ease it
backwards until it locks into its tilt
position. Add ingredients to the mixing
bowl. Then, un-lock the mixer head and
lower it forward into the mixing bowl.
commence mixing (Fig. 6), or, if a speed
is already set, press the
® Bench Mixer
button.
7