Schwinn A.C. Classic Service Manual page 8

Problem: Emergency Brake not functioning properly
Solution: Replace full assembly
1. Loosen the Brake Adjustment Rod (A) clockwise
while loosening the Brake Adjustment Housing (B)
counterclockwise.
2. As the Brake Adjustment Rod unscrews from the Link Arms (C)
raise the Brake Adjustment Housing and Rod.
3. Remove the torsion spring and slide out the brake assembly for
replacement.
When reinstalling the Brake Adjustment Rid into the Link
Arms do not overtighten as this will bend the Link Arms.
Troubleshooting
8
A
B
C