Advertisement
307-01-3
ASSEMBLY (Continued)
4. Inspect the case bearing for damage. If damage
to the case bearing is indicated, install a new
case.
5.
WARNING: Make sure the lock pin on
bench-mounted holding fixture is secure.
Failure to follow these instructions may
result in personal injury.
Using the special tool, install the transmission
into the bench with the converter housing
facing up.
6. Using the special tool, install the manual
control lever shaft seal and lubricate it with
petroleum jelly.
Automatic Transaxle/Transmission
7. Install the parking lever rod.
8. Install the manual control lever.
307-01-3
2005 Mustang, 12/2004
Advertisement
