Advertisement
307-01-17
ASSEMBLY (Continued)
Dimension D
38.29-38.42 mm
(1.51 in)
38.43-38.61 mm
(1.51-1.52 in)
38.62-38.74 mm (1.52-1.53
in)
78. Install the selected No. 1 fluid pump input
thrust washer.
• Coat the fluid pump input thrust washer
with petroleum jelly.
79. Install the special tools into the transmission
case.
80. Install the pump gasket.
Automatic Transaxle/Transmission
Service Part Number
(7D014)
F7TZ-NA
F7TZ-RA
F7TZ-SA
Bearing Thickness
1.85-1.90 mm (0.073-0.075
in)
2.05-2.10 mm (0.081-0.083
in)
2.15-2.20 mm (0.095-0.097
in)
81.
CAUTION: Make sure that the fluid
pump inlet thrust washer (No. 1), selective
thrust washer, fluid pump gasket and the
fluid pump-to-case O-ring seal remain in the
correct position throughout this step.
Install the fluid pump.
307-01-17
Identification (Color/ID)
Red
Black
Yellow
2005 Mustang, 12/2004
Advertisement
