Replacing Brake/Tail/Turn/Back-Up Lamp Bulbs - Pick-Ups Only; Replacing Brake/Tail/Turn/Back-Up Lamp Bulbs - Chassis Cabs Only - Ford 2008 F-250 Owner's Manual

Lights

Replacing brake/tail/turn/back-up lamp bulbs - Pick-ups only

1. Make sure the headlamp switch is
in the OFF position and then open
the tailgate to expose the lamp
assemblies.
2. Remove the two bolts from the
tail lamp assembly and carefully pull
the lamp assembly from the tailgate
pillar by releasing the two retaining
tabs.
3. Rotate the bulb socket counterclockwise and remove from lamp
assembly.
4. Pull the bulb straight out of the socket.
Install the new bulb(s) in reverse order.

Replacing brake/tail/turn/back-up lamp bulbs - Chassis cabs only

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the four screws and the
lamp lens from lamp assembly.
3. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
91
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)