Replacing Headlamp Bulbs (Sealed Beam) - Ford 2008 F-250 Owner's Manual

Lights

Replacing headlamp bulbs (sealed beam)

1. Make sure that the headlamp control is in the OFF position and open
the hood.
2. Remove the three screws and one
bolt from the top and bottom of the
park lamp/bezel assembly.
3. Remove the four screws and the
headlamp retaining ring from
headlamp.
4. Disconnect the electrical
connector from the headlamp.
Install the new bulb(s) in reverse order.
89
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)