Memory Seats/Adjustable Pedals/Mirrors (If Equipped); Activating The Memory Seat Feature; Deactivating The Memory Seat Feature; Replacing The Battery - Ford 2008 F-250 Owner's Manual

Locks and Security
Note: The panic alarm will only operate when the ignition is in the 1
(OFF/LOCK) position.

Memory seats/adjustable pedals/mirrors (if equipped)

The remote entry system can also control the memory seat/adjustable
pedals/mirrors.
Press to automatically move the seat, adjustable pedals and mirrors to
the desired memory position (the seat position corresponds to the
transmitter being used).

Activating the memory seat feature

To activate this feature:
1. Position the seat, adjustable pedals and mirrors to the position
desired.
2. Press the SET control on the
driver's door panel.
3. Within 5 five seconds, press one
control on the remote transmitter
and then press the 1 or 2 control on
the lower-center portion of the
instrument panel which you would
like to associate with the seat and
Driver 1 or Driver 2 positions.
4. Repeat this procedure for another
remote transmitter if desired.

Deactivating the memory seat feature

To deactivate this feature:
1. Press the SET control on the driver's door panel.
2. Within 5 five seconds, press any control on the remote transmitter
which you would like to deactivate and then press the SET control on
the lower-center portion of the instrument panel.
3. Repeat this procedure for another remote transmitter if desired.

Replacing the battery

The remote entry transmitter uses one coin type three-volt lithium
battery CR2032 or equivalent.
142
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)