Tether Strap Attachment - Ford 2008 F-250 Owner's Manual

Seating and Safety Restraints
• F-Series Crew Cab

Tether strap attachment

1. Position the child safety seat on the seat cushion.
2. Route the child safety seat tether strap over the back of the seat.
3. Locate the correct anchor for the selected seating position.
4. You may need to pull the seatback forward to access the tether
anchors. Make sure the seat is locked in the upright position before
installing the child seat. Refer to the Rear folding seat system with load
floor section in this chapter for information on how to operate the rear
seats.
5. Remove tether cover.
6. Clip the tether strap to the anchor as shown.
• Front seats (Regular Cab)
189
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)