Communication Control Commands - Aprilaire 8800 Programmer's Manual

COMMUNICATION CONTROl COMMANDS

NETAD Network communication address
Permissions: Write only
Assignment Syntax:
Command
Description: Sets the node address to [value] .
Example:
Response Syntax:
Example:
Parameters
value: node address
Default: 1
This command may not be used as a global command . If attempted as a global command the node does not respond .
<NUll> Report connected thermostats
Permissions: Read only
Query Syntax:
Command
Description: Global request to all connected thermostats for the node address .
Response Syntax:
Example:
NETST
Number of connected thermostats on the network
Permissions: Read/Write
Query Syntax:
Command
Description: Requests the number of thermostats setting .
Assignment Syntax:
Command
Description: Sets the number of thermostats setting to [value] .
Example:
Response Syntax:
Example:
Parameters
value: number of thermostats
Default: 64
SN[#] NETAD=[value]<CR>
SN1 NETAD=1<CR>
SN[#] NETAD=[value]<CR>
SN1 NETAD=1<CR>
Node address 1 responds with a network address of 1 .
SN?<CR>
SN0?<CR>
SN[#]<CR>
SN1<CR>
Node address 1 responds .
SN[#] NETST?<CR>
SN[#] NETST=[value]<CR>
SN1 NETST=4<CR>
SN[#] NETST=[value]<CR>
SN1 NETST=64<CR>
Node address 1 responds with a number of thermostats setting of 64 .
COS: N/A
Range
[1 – 64]
COS: N/A
COS: N/A
Range
[1 – 64]
15