Figure 14
Mini-XLR connector-to-control
system wiring diagram
Figure 15
Mini-XLR connector to external
12 VDC power supply, and
control system wiring diagram
14
Installing Mini-Touch Panels
Using the TiltScreen mini-XLR connector for AXlink data and power
Connect the control system' s AXlink connector to the mini-XLR connector (male) on
the rear panel of the TiltScreen mini-touch panel for data and 12 VDC power as
shown in Figure 14.
4-pin mini-XLR
connector
2
1
3
4
4 - PWR + (RED)
3 - AXP (WHT)
2 - AXM (GRN)
1 - GND - (BLK)
Using the TiltScreen mini-XLR connector for AXlink and an external 12
VDC power supply
Connect the control system' s AXlink connector to the mini-XLR connector and
external 12 VDC power supply to the rear panel of the mini-touch panel as shown in
Figure 15.
2
1
3
4
4 - PWR + (RED)
3 - AXP (WHT)
2 - AXM (GRN)
1 - GND - (BLK)
1
GND - (BLK)
2
AXM (GRN)
3
AXP (WHT)
4
PWR + (RED)
Control system
12 VDC power supply
PWR + (RED)
GND - (BLK)
1
GND - (BLK)
AXM (GRN)
2
3
AXP (WHT)
4
PWR + (RED)
Control system
Color Active-Matrix LCD Mini-Touch Panels