Appendix A - Programmer's Interface For System Diagnostics; System Component Information - AMX Precis DSP Instruction Manual

Appendix A – Programmer's Interface
for System Diagnostics

System Component Information

The Precis DSP displays system information in its splash screen* for diagnostic purposes. The
information indicates the current status and well-being of the system components.
~scr!
[1:Enclosure] Precis DSP
[2:Storage Blocks] cleared
[3:Communication Interfaces] count = 1
[4:Hardware Boards] detected
[5:VM Configuration] count = 2
FIG. 9
Example of a Precis DSP splash screen
The splash screen can be accessed using a terminal emulation program, such as HyperTerminal
(see page 30). One of four verbosity** settings is specified, which provides either a list of the five
system components with minimal information (FIG. 9) or a level of detailed information on one of the
five components. Only one verbosity setting and one component setting can be entered in a command.
The order in which the verbosity and component settings are entered is interchangeable.
* AMX reserves the right to add to the contents of the splash screen at any time, without notice.
** Verbosity (i.e., wordiness) refers to the amount of information provided; the higher the verbosity
setting, the more information is displayed.
Precis DSP Instruction Manual
Appendix A – Programmer's Interface for System Diagnostics
Command entered to display minimal
information for all system components
The system's component identity numbers
are to the left of each component
33