Technical Support - AMX Precis DSP Instruction Manual

Installation & Setup
Troubleshooting
If the test switch did not execute correctly:

Technical Support

Before contacting technical support with a question, please consult this manual. If you still have questions,
contact your AMX representative or technical support. Have your system's serial number ready. Viewed from
the rear, the system's serial number is located to the left on the end of the enclosure.
We recommend recording your system's serial number in an easily accessible location.
AMX Contact Information
20
Check the power indicator on the front of the enclosure.
If it is not illuminated, check the power cords.
Check all signal connections on the rear of the enclosure(s) to make sure everything is physically set
up correctly.
Check all power switches on the source and destination devices to make sure they are all turned on.
Attempt the switch again.
If the switch still does not work, contact technical support (see below).
3000 Research Drive, Richardson, TX 75082
800.222.0193
469.624.8000
Fax 469.624.7153
Technical Support 800.932.6993
www.amx.com
Precis DSP Instruction Manual