Fine-Tuning With Apgraphic Eq; Apgraphic Eq Views - AMX Precis DSP Instruction Manual

Fine-Tuning with APGraphic EQ

Overview
APGraphic EQ software is used for system setup and adjusting audio functionality.* The software is
found on the AMX AutoPatch CD that ships with the Precis DSP. For more information, see the Release
Notes and the Readme file.
These topics are covered in the "Installation & Setup" chapter
Once the Precis DSP is installed and all devices are in their final locations, the APGraphic EQ software
program can be used to fine-tune the sound system for optimum performance. If desired, it can also be
used for system control after setup (see page 28).
This chapter covers:
Important: To properly adjust the sound for the environment, you will need to route signals and
adjust the volume as necessary throughout the fine-tuning process.
* BCS command equivalents for all DSP functionality adjustments are provided for advanced users and
programmers who wish to create their own control programs; see the BCS Protocol Instruction Manual
on the AMX AutoPatch CD or at www.amx.com.

APGraphic EQ Views

APGraphic EQ has three views (windows) for adjusting and routing signals:
Precis DSP Instruction Manual
Installing APGraphic EQ software (see page 18)
Routing test switches (see page 19)
Executing switches (see page 22)
Adjusting volume (see page 22)
Adjusting digital input gain (see page 23)
Adjusting equalization bands and balance (see page 24)
Adjusting tone (see page 25)
APGraphic EQ main interface – used for adjusting volume (see page 22), equalization bands
and balance (see page 24), and tone (see page 25).
CrossBar view – opens from the Options menu for routing inputs to outputs (see page 22).
Input Gain view – during system setup, this view can be opened for adjusting input gain
(see page 23).
Fine-Tuning with APGraphic EQ
21