Reducing Speed While Using Speed Control; Turning Off Speed Control - Ford 2003 Ranger Owner's Manual

Driver Controls

Reducing speed while using speed control

There are three ways to reduce a
set speed:
• Press and hold the COAST
control until you get to the
desired speed, then release the
control.
• Press and release the COAST
control to operate the Tap-Down
function. Each tap will decrease the set speed by 1.6 km/h (1 mph).
• Depress the brake pedal or the
clutch pedal (if equipped) until
the desired vehicle speed is
reached, press the SET ACCEL
control.

Turning off speed control

There are two ways to turn off the
speed control:
• Press the speed control OFF
control.
• Turn OFF the ignition.
Note: When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.
56