Lubricant Specifications - Ford 2003 Ranger Owner's Manual

2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
3
Service refill capacity for the manual transmission is determined by
filling the transmission to the bottom of the filler hole with the vehicle
on a level surface.
4
Add the coolant type originally equipped in your vehicle.
5
Traction-Lok axles use 2.2–2.4L (4.75–5.0 pints) of rear axle lubricant.
6
Add 118 ml (4 oz.) of Additive Friction Modifier XL–3 or equivalent
meeting Ford specification EST-M2C118–A for complete refill of
Traction-Lok axles.
Service refill capacities are determined by filling the rear axle 6 mm to
14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole.
7
Use of sythetic or sythetic blend motor oil is not mandatory. Engine oil
need only meet the requirements of Ford specification WSS-M2C153–H
and the API Certification mark.

LUBRICANT SPECIFICATIONS

Ford part
Item name or
equivalent
Motorcraft SAE
Front axle 80W-90
(4X4) Premium Rear
Axle Lubricant
Motorcraft SAE
80W-90
Rear axle
Premium Rear
Axle Lubricant
Motorcraft SAE
Rear axle (FX4 75W-140
only) Synthetic Rear
Axle Lubricant
Maintenance and Specifications
Ford part
number
XY-80W90-QL
XY-80W90-QL
1
XY-75W140–QL
1
Ford
specification
WSP-M2C197-A
WSP-M2C197-A
WSL-M2C192–A
235