Replacing Foglamp Bulbs (If Equipped); Replacing High-Mount Brakelamp And Cargo Lamp Bulbs; Replacing License Plate Lamp Bulbs - Ford 2003 Ranger Owner's Manual

Lights

Replacing foglamp bulbs (if equipped)

1. Remove the bulb socket from the
foglamp by turning
counterclockwise.
2. Disconnect the electrical
connector.
Install the new bulb in reverse order.

Replacing high-mount brakelamp and cargo lamp bulbs

1. Remove the two screws and lamp
assembly from vehicle.
2. Remove the bulb socket from
lamp assembly by rotating it
counterclockwise.
3. Carefully pull bulb straight out of
socket.
Install the new bulb(s) in reverse order.

Replacing license plate lamp bulbs

1. Reach behind the rear bumper to
locate the bulb socket.
2. Twist the socket counterclockwise
and remove.
3. Carefully pull the bulb straight
out of the socket.
Install the new bulb(s) in reverse order.
50