Replacing Front Side Marker Bulbs - Ford 2003 Ranger Owner's Manual

Lights

Replacing front side marker bulbs

1. Turn the headlamp switch to the
OFF position and then open the
hood.
2. Remove two screws and cover
(if equipped).
3. At the back of the headlamp, pry
up the two retainer pins to release
the headlamp assembly from the
vehicle and pull headlamp forward.
4. Remove screw(s) from lamp
assembly and disengage lamp
assembly (it has a snap fit).
5. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
6. Carefully pull bulb straight out of
socket and push in the new bulb.
7. Install the bulb socket in lamp
assembly by turning clockwise.
Install the new lamp in reverse order.
48