Replacing License Plate Lamp Bulbs; Replacing Tail Lamp/Backup Bulbs; Interior Bulbs - Ford 1999 Mustang Owner's Manual

Maintenance and care
1. Rotate the foglamp
bulb counterclockwise
and remove from
foglamp (the rear side
of the foglamp is
shown).
2. Disconnect the
electrical connector
from the foglamp bulb.
3. Connect the electrical connector to the new
foglamp bulb.
4. Install the foglamp bulb in foglamp by rotating
clockwise.

Replacing license plate lamp bulbs

To change the license plate bulbs:
1. Open trunk and
remove bulb socket
from the trunk lid by
turning
counterclockwise.
2. Pull the bulb straight
out of the socket and
push in the new bulb.
3. Install the bulb socket in trunk lid by turning
clockwise.

Replacing tail lamp/backup bulbs

For bulb replacement, see a dealer or qualified
technician.

Interior bulbs

Check the operation of the following interior bulbs
frequently:
interior overhead lamp
map lamp
174