OmniSwitch Series switches use both copper-based and fiber-based optical Small Form Factor Pluggable
SFP and SFP+ transceivers. These transceivers are fully hot-swappable and are available for both short-
reach and long-reach applications. Copper-based and fiber-based optical transceivers can be mixed on the
same module.
In This Chapter
This chapter describes the technical specifications for all the OmniSwitch supported transceivers. For
additional details about OmniSwitch modules, see the appropriate OmniSwitch Hardware Guide.
Transceiver specifications in this chapter include:
•
SFP MSA Specifications. See
•
Transceiver Installation. See
•
Gigabit Ethernet Transceivers. See
•
Dual-Speed Ethernet Transceivers. See
•
Bi-directional Ethernet Transceivers. See
•
100-FX Ethernet Transceivers. See
•
CWDM Gigabit Ethernet Transceivers. See
•
10-Gigabit SFP+ Transceivers. See
•
For a transceiver compatibility matrix, see
OmniSwitch AOS Release 7 Transceivers Guide
1 Small Form-Factor
Pluggables (SFP/SFP+)
"SFP MSA Specification" on page 1-2
"Transceiver Installation and Removal" on page 1-3
"Gigabit Ethernet Transceivers" on page
"Bi-directional Ethernet Transceivers" on page
"Bi-directional Ethernet Transceivers" on page
"100 FX Ethernet Transceivers" on page
"CWDM Gigabit Ethernet Transceivers" on page
"10-Gigabit SFP+ Transceivers" on page 1-14
"Transceiver Compatibility Matrix" on page
December 2010
1-5.
1-8.
1-8.
1-11.
1-13.
2-17.
page 1-1