Connecting The Power Cord On Oa-780 - Alcatel-Lucent OmniAccess 700 (Vers. 2.2, 2.2-R02, 2.3) Getting Started Manual

Left running head:
Chapter name (automatic)
Connecting AC Input Power
3. OA-780 Power Supply Specification: The OA-780 requires 100/240V
O A 7 - P S - A
Figure 2: Connecting the Power Cord on OA-780
Step 1: Use the shipped power cord to power your system.
Step 2: Verify that the power switch located on the rear panel is in OFF (O)
position.
Step 3: Connect the system end of the connector to the OA-740/OA-780, as
shown in the figures above.
Step 4: Identify a power source point that complies with the system specifications,
and connect the power plug of the AC cable to the utility power socket.
Step 5: Ensure that the cable is not left in a hazardous position that could impair
movement of personnel or be frayed due to the movement of other equipment in
the vicinity.
Warning: Read the installation instructions before you connect the OA-700 to its power source.
4
Beta
and 6A (RMS) @115V, 3A (RMS) @ 230V AC power. A fully loaded OA-
780 consumes approximately 350W of power.
For more details on power supply specifications, see the "AC Power
Specifications" chapter in the "OmniAccess 780 Hardware Users
Guide".
C
Alcatel-Lucent
R ea d y
Fa ul t
OmniAccess 700 Getting Started Guide
Beta