Features; Vitalqip 7.2 Next-Generation Web Gui - Alcatel-Lucent VitalQIP 7.2 Product Description

VitalQIP Product Description

3 FEATURES

The following are the key features of the VitalQIP product.

3.1 VitalQIP 7.2 Next-Generation Web GUI

The 7.2 next-generation Web GUI was designed and built using Redefined Software Architecture and
Tools such as Spring, Hibernate, AJAX, etc.
Below is the main section with the home screen set of tabs. The ten main tabs are described in detail
below.
MyView tab – This tab allows users to access the pre-defined 'views' of the GUI that either they set up
or have been set up for them. The MyView tab consists of two sub-tabs MyView Hierarchy and MyView
Personalization:
•
MyView Hierarchy – Allows the user to view the properties of personal and shared views.
•
MyView Personalization – Used to add, modify and delete personal views.
Address Management tab – This tab allows for user to perform IP Address Management for IPv4,
IPv6 networks as well as manage or set up nodes in the VitalQIP 7.2 Web GUI. This tab consists of three
sub tabs IPV4, IPV6 and Node
•
IPV4 – Administrators can view networks, domains, subnets, subnet organizations, add
networks and search.
•
IPV6 – Used to add a seed block, subnet search, add an address range, or run some configured
reports.
•
Node – New to QIP 7.x. add a node and search nodes
DNS tab – Provides the entire configuration necessary for DNS servers. This tab has six sub-tabs shown
below:
•
ACL Templates – Add, modify and delete ACL Templates
©
Copyright 2009 Alcatel-Lucent
Use pursuant to company instructions
Features
Page 12