Onkyo CR-325UKD Instruction Manual page 9

Getting to Know the CD receiver—Continued
The page numbers in parentheses show where you can find the main explanation for each item.
STANDBY indicator (23, 25)
Lights up in Standby mode.
STANDBY/ON button (25, 53, 56, 59)
Sets the CD receiver to On or Standby.
Remote control sensor (6)
Receives control signals from the remote controller.
Display
See "Display" on page 10.
VOLUME control (25) and indicator
This control is used to adjust the volume of the
CD receiver to "Min", "1" through "41", "Max".
The volume control indicator lights up when the CD
receiver is on.
PHONES jack (25)
This stereo minijack is for connecting a pair of ste-
reo headphones for private listening.
USB port (CR-525UKD only) (38)
A USB mass storage device, such as a USB flash
drive or MP3 music player, containing music files
(MP3, WMA) can be plugged in here and the music
selected and played through the CD receiver.
Disc tray (28)
The CD is loaded here.
INPUT button (25, 27, 46, 48)
Used to select the input source.
DISPLAY button (29, 32, 42, 49, 53)
Used to change the information shown on the dis-
play. Also used to select characters when naming
radio presets.
DIRECT button (26)
Used with the Direct function.
Previous/Next [ ]/[
PRESET [ ]/[ ] buttons (28, 41)
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [
next track.
When the AM or FM input source is selected, these
buttons are used to tune the tuner, or select radio
presets.
Open/Close [ ] button (28)
Used to open and close the disc tray.
Stop [ ] button (28, 59)
Stops CD playback.
Play/Pause [ / ] button (28)
Starts CD playback. Pressing it during playback
pauses playback.
] buttons or
] button selects the
9