Table of Contents
Advertisement
Resetting REMOTE MODE Buttons
You can reset a REMOTE MODE to its default remote
control code.
1
While holding down REMOTE MODE that you
want to reset, press and hold down HOME until the
remote indicator lights (about 3 seconds).
2
Within 30 seconds, press REMOTE MODE again.
The remote indicator flashes twice, indicating that the
button has been reset.
Each of REMOTE MODE is preprogrammed with a
remote control code. When a button is reset, its
preprogrammed code is restored.
Resetting the Remote Controller
You can reset the remote controller to its default settings.
1
While holding down RECEIVER, press and hold
down HOME until the remote indicator lights
(about 3 seconds).
2
Within 30 seconds, press RECEIVER again.
The remote indicator flashes twice, indicating that the
remote controller has been reset.
Controlling Other Components
By pressing REMOTE MODE that's been programmed
with the remote control code for your component, you can
control Onkyo component as below.
For details on entering a remote control code for a
page 44).
different component
(➔
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the
The component must be able to receive remote control
commands via
and be connected to the AV
receiver via HDMI.
Use the following remote control codes:
32910/33001/31612:
Blu-ray Disc/DVD player with
*1
The
supported by the AV receiver is the CEC
system control function of the HDMI standard.
.
*1
En
45
Hide quick links:
Advertisement
Table of Contents
