Resetting The Remote Mode Buttons; Resetting The Remote Controller - Onkyo TX-SR313 Instruction Manual

Controlling Onkyo components without
If you want to control an Onkyo component by pointing the
remote controller directly at it, or you want to control an
Onkyo component that's not connected via
following remote control codes:
30627:
Onkyo DVD player without
71817:
Onkyo CD player without
32900/33000:
Onkyo Blu-ray Disc player
32901/33004:
Onkyo HD DVD player
70868:
Onkyo MD recorder without
71323:
Onkyo CD recorder without
82990:
Onkyo Dock without

Resetting the REMOTE MODE Buttons

You can reset a REMOTE MODE button to its default
remote control code.
, use the
1
While holding down the REMOTE MODE button
that you want to reset, press and hold down HOME
until the remote indicator lights (about 3 seconds).
2 Within 30 seconds, press the REMOTE MODE
button again.
The remote indicator flashes twice, indicating that the
button has been reset.
Each REMOTE MODE button is preprogrammed
with a remote control code. When a button is reset, its
preprogrammed code is restored.
En-51
Controlling Other Components

Resetting the Remote Controller

You can reset the remote controller to its default settings.
1
While holding down RECEIVER, press and hold
down HOME until the remote indicator lights
(about 3 seconds).
2
Within 30 seconds, press RECEIVER again.
The remote indicator flashes twice, indicating that the
remote controller has been reset.