Tcremotelocal - Omron CX-Supervisor Reference Manual

Temperature Controller Commands
6-7-4

TCRemoteLocal

Argument Type
paramID point
value point,
real or
int
Typical Example
temp1 = TcGetStatusParameter("e5ak",temp2,temp3)
Syntax
returnstate = TCRemoteLocal(TController,mode)
Remarks
Argument Type
returnstate bool
TController string
SECTION 6 Functions and Methods
Description
This is a point depicting the required parameter
range 0 to 22:
0: ControlMode.
1: Output.
2: InputShiftDelay (Bool) E5*F, E5*X, E5*J.
3: DisplayUnit.
4: PIDConstantDisplay (Bool) E5*F, E5*X,
E5*J.
5: OutputType.
6: CoolingType.
7: Output2.
8: Alarm1.
9: Alarm2.
10: InputType (Integer) E5*F, E5*X, E5*J.
11: OperationMode.
12: BackupMode.
13: AutoTuneMode.
14: OverFlow (Bool) E5*F, E5*X, E5*J.
15: UnderFlow (Bool) E5*F, E5*X, E5*J.
16: SensorMalfunction (Bool) E5*F, E5*X,
E5*J.
17: ADConvertorFailure (Bool) E5*F, E5*X,
E5*J.
18: RAMAbnormality (Bool) E5*F, E5*X, E5*J.
19: RAMMismatch (Bool) E5*F, E5*X, E5*J.
20: StatusWordsOnly (Bool) E5*K only (TRUE
indicates valid words below).
21: Status0 (word) E5*K only.
22: Status1 (word) E5*K only.
The returned status parameter value. Refer to
paramID above for details.
Description
1 if the function is successful otherwise 0.
This is a string representing the name of the
temperature controller.
73