Advertisement
Quick Links
CX-Thermo Support Software Ver. 4.0
EST2-2C-MV4
Monitoring/Setting Support Software for E5CN/CN-H, E5AN/AN-H,
E5EN/EN-H, E5ZN, E5@R/@R-T, and EJ1 Temperature Controllers
Enabling Faster Parameter Setup, Device Adjustment, and
Maintenance
• Enables editing and batch-downloading parameters from a
personal computer, reducing the work required to set parameters.
Usability is improved with table-formatted parameter editing from
version. 4.0.
• Supports Trend Monitoring:
Monitor data (PV,SP,MV,PID parameter, Alarm ON/OFF, etc.) for
up to 31 E5@N/@N-H Temperature Controllers.
Connect up to 64 EJ1N, 17 EJ1G, or 16 E5ZN Temperature
Controllers. (The Temperature Controllers must be from the same
series.)
• Supports parameter masks to hide parameters unnecessary to
display. (Supported only by the E5@N/@N-H and E5@R/@R-T).
• Logic operations enable setting inputs from external inputs (event
inputs) or temperature status, outputs to external outputs (control or
auxiliary outputs), and changing operating status with ON/OFF
delays.
(Supported only by the E5@N/@N-H).
• Easy adjustment of control performance by fine-tuning.
✽ Fine-tuning instructs the CX-Thermo to calculate a PID parameters by
directly inputting commands to improve response.
Ordering Information
List of Models
Name
CX-Thermo Support Software
Specifications
Compatible
Temperature
devices
Controllers
Personal
OS
computer
CPU
system
requirements
Memory
Harddisk
CD-ROM
Monitor
Communications
ports
Connection method
Note: "E5@N" indicates the upgraded versions of the E5CN, E5AN, and E5EN.
CX-Thermo Support Software Ver. 4.0
Model
EST2-2C-MV4
E5CN (from April 2004)
E5AN, E5EN (from Feb 2005),
E5CN-H, E5AN-H, E5EN-H
E5AR, E5ER, E5AR-T, E5ER-T
E5ZN
EJ1N-TC4, EJ1N-TC2, EJ1N-HFU (CeliuXº)
EJ1G-TC4, EJ1G-TC2, EJ1G-HFU (CelciuXº Gradient Temperature Control)
G3ZA (only when connected to EJ1N-TC4, EJ1N-TC2, EJ1G-TC4, EJ1G-TC2)
Note: Models with DeviceNet communications are not supported.
Windows 2000 (service pack 3 or higher), XP, or Vista (Japanese or English version)
300 MHz min.
128 MB min.
300 MB min. available space
One CD-ROM drive min.
SVGA (800 × 600) min.
• RS-232C port, or USB port, 1 port min.
• An E58-CIFQ1 USB-Serial Conversion Cable is required to connect a computer to the setup tool port the
E5@N, E5@N-H, or EJ1.
• A K3SC Interface Converter is used to connect a computer to models with RS-422/RS-485.
• An E58-CIFIR USB-Infrared Conversion Cable is required to wirelessly connect a computer to models with
infrared communications (E5AN-H or E5EN-H).
EST2-2C-MV4
Advertisement
Related Manuals for Omron EST2-2C-MV4
Summary of Contents for Omron EST2-2C-MV4
- Page 1 • RS-232C port, or USB port, 1 port min. Communications ports • An E58-CIFQ1 USB-Serial Conversion Cable is required to connect a computer to the setup tool port the Connection method E5@N, E5@N-H, or EJ1. • A K3SC Interface Converter is used to connect a computer to models with RS-422/RS-485.
- Page 2 • Never use the products for any application requiring special safety requirements, such as nuclear energy control systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, or other application involving serious risk to life or property, without ensuring that the system as a whole has been designed to address the risks, and that the OMRON products are properly rated and installed for the intended use within the overall equipment or system.