Omron CX-Supervisor Reference Manual page 45

44
Function Name
PLCCommsFailed
PLCMonitor
PointExists
PrintActivePage
PrintFile
PrintMessage
PrintPage
PrintReport
PrintScreen
PrintSpoolQueue
Rand
Read
ReadMessage
Right
rotate
RunApplication
RunHelp
SelectFile
SetBit
SetPLCMode
SetPLCPhoneNumber
SetupUsers
ShutDown
sin
sqrt
StartAuditTrail
StopAuditTrail
StartLogging
StopLogging
tan
TCAutoTune
SECTION 6 Functions and Methods
Function Type Type Remarks
PLC command All
PLC command Scr
point command All
gen. command Scr
file command Scr
text command All
gen. command Scr
report command All
gen. command Scr
printer All
command
gen. command Scr
file command Scr
file command All
text command Scr
object command OP
gen. command Scr
gen. command Scr
file command All
point command All
PLC command All
PLC command All
security Scr
command
gen. command Scr
unary function All
unary function All
Data Logging Scr
command
Data Logging Scr
command
Data Logging Scr
command
Data Logging Scr
command
unary function All
temp. controller All
command
Specifies if the PLC
communications have failed.
Monitors a PLC.
Specifies the existence of a point.
Prints the currently active page.
Prints the specified file.
Prints messages to the configured
'Alarm/message printer'.
Prints the specified page.
Prints a report
Prints the current display screen.
Prints all queued alarms or
messages.
Calculates a random number.
Reads data from an open file into
a point.
Reads text from an external file.
Extracts characters from the right
of a string.
Rotates an object.
Runs the specified application.
Runs the specified help file.
Specifies a file name and path.
Sets a specific bit from a point.
Sets the mode of a PLC.
Sets a phone number to a PLC.
Defines users and passwords for
Login.
Terminates CX-Supervisor.
Applies unary expression.
Applies unary expression.
Starts Audit Trail logging.
Stops Audit Trail logging.
Starts a data set logging.
Stops a data set logging.
Applies unary expression.
Starts or stops a temperature
controller auto-tune operation.