Disable - Omron CX-Supervisor Reference Manual

Object Commands
6-1-5

Disable

Argument Description
context This argument is optional an may be omitted. It defines
which part of the object has it's colour changed. May be
one or more of:
@FILL - change fill colour
@FRAME - changes frame colour
If omitted both are changed.
@FRAME
Typical Examples
TEXT_3.colour (blue)
or
TEXT_3.colour = blue
The object 'TEXT_3' is set to blue.
BALL.colour (35 + 0x1000000)
The object 'BALL' is set to colour 35 from the colour palette.
BALL.colour (0xFF0000,@FILL)
The object 'BALL' is set to blue.
shade = tint1 + tint2
IF shade > 65 OR shade < 0 THEN
shade = 0
ENDIF
ELLIPSE_1.colour (shade + 0x1000000)
The point 'shade' is set to a value based on 'tint1' and 'tint2', and is tested first
to ensure that it is a value between 0 and 65. If 'shade' falls outside this range,
then it cannot be applied as a colour to an object, and is therefore reset to 0
(or black). ELLIPSE_1' is set to the palette colour of the value of shade.
References
Refer to chapter 6, Colour Palette for details of colour names and colour
numbers.
Syntax
objectname.disable (expression)
Remarks
Argument Description
objectname This is the name of the object. Where a script is directly
attached to an object, objectname is not required.
expression The expression can be made up of points resulting in
'TRUE' or 'FALSE'.
Typical Examples
disable (TRUE)
The current pushbutton object to which this example applies is disabled.
PUSH_8.disable (count AND flag)
The selectable object 'PUSH_8' is disabled provided Integer point 'count' AND
Boolean point 'flag' return ''TRUE''.
SECTION 6 Functions and Methods
Equivalent to @FILL |
49