Object Commands
6-1-3
Blink
Argument
Description
objectcommand
This can be made up of the following commands, which
are described in chapter 6, Object Commends:
The content of the commands are made up arithmetical
or logical expressions, x and y co-ordinates, or
references, varying between commands. The colour
command requires a colour identifier.
Typical Examples
POLYGON_1.colour (red)
POLYGON_1.colour = red
The specified object, 'POLYGON_1' is set to be red in colour.
References
Refer to:
•
CX-Supervisor User Manual for details of object names.
•
Chapter 6, Blink for use of the blink command.
•
Chapter 6, Colour for use of the colour command.
•
Chapter 6, Disable for use of the disable command.
•
Chapter 6, Height for use of the height command.
•
Chapter 6, Horizontal Fill for use of the horizontal fill command.
•
Chapter 6, Move for use of the move command.
•
Chapter 6, Rotate for use of the rotate command.
•
Chapter 6, Vertical Fill for use of the vertical fill command.
•
Chapter 6, Visible for use of the visible command.
•
Chapter 6, Width for use of the width command.
Syntax
objectname.blink (colour, status)
Remarks
Argument
Description
objectname
This is the name of the object. Where a script is directly
attached to an object, objectname is not required.
SECTION 6 Functions and Methods
•
Blink command
•
Colour command.
•
Disable command.
•
Visible command.
•
Move command.
•
Rotate command.
•
Vertical fill command.
•
Horizontal fill command.
•
Height command.
•
Width command.
47