Olivetti Fax-Lab 100 User Manual page 5

17. To see the other available option, press the keys:
/ The display shows:
18. To confirm the setting, press the key:
At this point, if transmission was aborted, the fax machine
automatically prints the failed transmission report and the
display shows the message "TX ERROR" again.
To clear the message from the display and turn off the
error LED indicator " " press the key
If you have chosen "SAVE SMS:YES", the message "SAVED" ap-
pears on display for a few seconds and your message will be saved
on the list of messages sent "SMS SENT". At this point you can
always send it again or change it.
If, while writing a message, you press
idle for more than 2 minutes, the text of your message will be saved
on the list of written messages "SMS WRITTEN".
If the message "MEMORY FULL", "DELETE SMS" appears on dis-
play and the fax machine does not allow you to write the text of your
message, this means that:
- the sent message memory is full
or
- the draft message memory is full
or
- both memories are full.
At this point, delete at least one of the messages from either or both of
the memories (depending on the case). See "To delete a message
(SMS)" later in the manual.
If there is no power for over an hour, the fax machine will delete all the
messages. To have a record of all the messages received, refer to
the report of power failure that will be automatically printed by the fax
machine or require the printout of activity report (see the instruction
manual of the fax machine).
T
O SAVE A MESSAGE
SENDING IT
1. Press the key:
The display shows:
2. Press the key:
The display shows:
.
or your fax machine is
( )
SMS WITHOUT
3. Write the text of the message (max. 640 characters) as
described in "To write and send a message (SMS)".
4. To confirm the setting, press the key:
The display shows:
5. Press the keys
/ until the display shows:
6. To confirm the setting, press the key:
The message "SAVED" appears on display for a few sec-
onds. The message will be saved on the list of written
messages "SMS WRITTEN".
The fax machine returns automatically to its initial stand-by
mode.
If the message "MEMORY FULL", "DELETE SMS" appears on dis-
play and the fax machine does not allow you to write the text of your
message, this means that:
- the sent message memory is full
or
- the draft message memory is full
or
- both memories are full.
At this point, delete at least one of the messages from either or both of
the memories (depending on the case). See "To delete a message
(SMS)" later in the manual.
T /
O EDIT SEND AGAIN A MESSAGE
Look at the list of messages sent or written (not sent yet) if
you want to find a message that you wish to edit and/or
send again.
F
ROM THE LIST OF MESSAGES SENT
1. Press the key:
The display shows:
2. Press the keys
/ until the display shows:
"XX" is the number that appears in the upper right-hand
side corner and it indicates the total number of messages
sent (max. 5). It is useful if you want to know how many
messages you have sent and, therefore, how many you
can still send.
3. To confirm the setting, press the key:
The display shows:
( )
SMS
3