Setting Lcd Save; Setting Date & Time; Setting Language; Setting File Numbering - AgfaPhoto OPTIMA 105 User Manual

AgfaPhoto OPTIMA 105

Setting LCD Save

Enable the LCD Save function to automatically decrease the LCD
brightness to conserve battery power. When the camera is idle
for 20 seconds, the LCD darkens. Press any button to resume to
normal brightness.
The camera is idle when no buttons are pressed. LCD
•
Save, though enabled, does not function during video
playback, slideshow, video recording and Pre-Composition
scene mode shooting.
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is useful in attaching
date stamps on captured images. Your camera uses a 24-hour time format.
1. Press the navigation controls to adjust date and time
value. By holding down the
values changes continuously.
2. Press the SET button to apply changes.

Setting Language

Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Use the navigation control to scroll through the list and
select the desired language.
2. Press the SET button to confirm and apply settings.

Setting File Numbering

This function allows you to select the method in which to assign file numbers to images.
Available settings are:
• Series. Assigns number to files in sequence even if the
folder is changed.
• Reset. Starts from 0001 each time the folder is changed.
To understand folder and file structure of your camera, see
"About Folder and File Names" on page 60.
or keys, the numeric
54