Setting The Drive Mode - AgfaPhoto OPTIMA 105 User Manual

AgfaPhoto OPTIMA 105

Setting the Drive Mode

Your camera features a Self-timer and Burst which can be set
in the Drive Mode function in the Record Menu. The Self-timer
allows you to take images after a pre-defined delay. While
burst lets you take consecutive shots. This function is only
available in recording still images. The Drive Mode setting is
automatically set to off when you turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
2. Use the or
3. Press the SET button to save and apply changes.
The table below shows the available Drive Mode settings.
Icon Item
10 Sec.
2 Sec.
Double.
Burst
Speedy Burst
Off
keys to go through the selection.
Sets a 10-second delay to capture image after pressing the Shutter button.
Sets a 2-second delay to capture image after pressing the Shutter button.
Performs delay and capture twice:
Performs a 10-second delay, then captures the image.
•
Performs another 2-second delay then captures the image again.
•
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the Shutter button is released.
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
Captures an image without time delay.
34
Description