Turning The Power On And Off; Initial Settings; Modes - AgfaPhoto OPTIMA 105 User Manual

AgfaPhoto OPTIMA 105

Turning the Power On and Off

There are two ways to turn on the camera:
• The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and
the camera is turned on in Record Mode.
• The camera is turned on in Playback Mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See "Modes" on page 12 to know more about Record and Playback Mode.

Initial Settings

When you turn on your camera for the first time, you will be asked to do the initial settings of your camera.
First is the setup of language menu. Specify in which language menus and messages are to be displayed on
the LCD monitor.
Setting the Language
1. Press , , or
2. Select a language, and then press SET to apply.
Setting the Date & Time
1. Press or to move through the selection.
or
2. Press keys to change the value for the date and time.
3. Press SET to apply.
4. If necessary, press
Now, you are ready to start taking images and videos.
Holding down

Modes

Your camera has three Modes:
Photo Mode
• Slide the mode switch to [
You can record audio clips by selecting Voice REC from scene mode in this mode.
Movie Mode
• Slide the mode switch to [
Playback mode
• Slide the mode switch to [
The recording of voice memo attached to images is available in this mode.
to move through the selection.
to close the menu.
or keys to change the values continuously.
] to capture images.
] to record videos.
] to view and edit captured images or playback videos and audio clips.
12