Table of Contents
Advertisement
Item
Startup
Shutter
Operation
Volume
Setting Power Save
The Power Save function allows you to set an idle time
after which the camera automatically sets to sleep mode to
save power. After a minute of being in sleep mode, the
camera eventually turns off power.
This function is not available in the following instances:
• Recording a movie or audio file
• Playing a slideshow/movie/audio file
• Using the USB connector
Setting LCD Save
Enable the LCD Save function to automatically decrease the
LCD brightness to conserve battery power. When the
camera is idle for 20 seconds, the LCD darkens. Press any
button to resume to normal brightness.
• The camera is idle when no buttons are pressed. LCD
Save, though enabled, does not function during movie
playback, slideshow, and video recording.
Available Settings
Sound 1, Sound 2,
Sound 3, Off
On, Off
On, Off
0-4
Description
Selects the startup sound when camera is turned
on.
Enables or disables shutter sound when shutter
button is pressed. Shutter sound is not available
when recording movies or voice clips.
Enables or disables operation sound.
Adjusts volume.
77
Sounds
Power Save
1 min.
1min
LCD Save
3 min.
3min
Date & Time
5 min.
5min
Language
Off
OFF
File Numbering
Sounds
Power Save
LCD Save
On
ON
Date & Time
Off
OFF
Language
File Numbering
1min
OFF
1min
OFF
Advertisement
Table of Contents
