AgfaPhoto OPTIMA 105 Table of Contents Preface ......................3 About this Manual .................. 3 Safety and Handling Precautions.............. 3 Using this Menu ..................4 Introduction ....................5 System Requirements ................5 Main Features ..................5 Package Contents................... 6 Camera Views ..................7 Camera Buttons ..................
Page 3
AgfaPhoto OPTIMA 105 Setting Power Save................53 Setting LCD Save.................. 54 Setting Date & Time ................54 Setting Language ................. 54 Setting File Numbering ................. 54 Setting TV Out ..................55 Setting LCD Brightness ................. 55 Setting Memory Kit ................55 Reset All ....................
AgfaPhoto OPTIMA 105 Preface About this Manual This manual is designed to assist you in using your new AgfaPhoto digital camera. All information presented is as accurate as possible but is subject to change without notice. Copyright This manual contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
AgfaPhoto OPTIMA 105 Battery Information • Turn off the camera before installing or removing the battery. • Use only the provided batteries or type of battery and charger that came with your camera. Using other types of battery or charger may damage the equipment and invalidate the warranty.
AgfaPhoto OPTIMA 105 Introduction Congratulations on your purchase of the new AgfaPhoto OPTIMA 105 digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. System Requirements In order to get the most out of your camera, your computer must meet the following system requirements: For Windows: •...
AgfaPhoto OPTIMA 105 Package Contents Please check the contents of your camera package. It should contain: AgfaPhoto OPTIMA 105 Rechargeable battery x 1 pcs Battery charger Wrist strap USB cable AV cable (optional) CD-Rom Quick Start Guide/ Camera pouch User Manual (optional)
AgfaPhoto OPTIMA 105 Camera Views Front View Flash Self-timer LED/ AF Assist Lamp Lens Microphone Back View LCD monitor Mode Switch Photo Mode Movie Mode Playback Mode LED indicator Menu button SET button/4-way navigation control 10. Function/Delete button Top View 11.
AgfaPhoto OPTIMA 105 Bottom View 15. Tripod screw hole 16. Speaker 17. Battery/Memory card compartment 18. USB/TV Out Left Right View Strap ring Camera Buttons Your camera is equipped with different buttons for ease of use Button Description Power Press the Power button to turn the power on/off.
AgfaPhoto OPTIMA 105 Navigation Control The 4-way Navigation Control and the SET button allow you to access the various menus available from the On Screen Display (OSD). You can configure a wide range of settings to ensure maximum results from your images and videos.
AgfaPhoto OPTIMA 105 Camera Memory Internal memory Your camera is equipped with 64MB of internal memory. Users can store images up to 14MB. If there is no memory card inserted in the memory card slot, all images, videos and audio clips recorded are automatically stored in the internal memory.
AgfaPhoto OPTIMA 105 4. Close and lock the battery/memory card compartment Inserting an SD/SDHC Memory Card Expand your camera’s storage by using SD or SDHC memory cards. 1. Unlock and open the Battery/memory card compartment at the bottom of the camera.
AgfaPhoto OPTIMA 105 Turning the Power On and Off There are two ways to turn on the camera: • The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and the camera is turned on in Record Mode.
AgfaPhoto OPTIMA 105 Using the LCD monitor The LCD monitor shows all important information regarding camera settings as well as the visual image of your image or video. The display on the LCD monitor is called the On Screen Display or OSD.
Page 15
AgfaPhoto OPTIMA 105 Movie Mode Screen Layout Standby layout Recording Layout Item Description Record Mode Indicates the current mode. Zoom indicator Displays zoom. Time remaining Indicates the remaining time of video available. Battery Indicates battery level. Storage media Indicates current storage media in use.
Page 16
AgfaPhoto OPTIMA 105 Playback Mode Screen Layout The Playback Mode display varies depending on the type of image being viewed. Playback Mode display of still images: Item Description Playback Mode Indicates Playback Mode. Protect Indicates file is protected. Voice memo Indicates voice memo is attached.
Page 17
AgfaPhoto OPTIMA 105 Playback Mode of videos: Item Description Playback Mode Indicates Playback Mode. Protect Indicates file is protected. Video clip Indicates the file is a video. Button intro Indicates the button to press on the camera to play a video or audio file.
Page 18
AgfaPhoto OPTIMA 105 Playback Mode of audio clips: Item Description Playback Indicates Playback Mode. Protect Indicates file is protected. Button intro Indicates the button to press on the camera to play a video or audio file. File no./Total no. Indicates the file number over the total number of files in the storage card.
AgfaPhoto OPTIMA 105 Changing the LCD Monitor Display The type of information displayed on the LCD monitor can be changed using the button. Press the button repeatedly to change the LCD display from one type to another. In Photo/Movie Mode, the LCD display can be changed into any of the following: •...
AgfaPhoto OPTIMA 105 Using the Stabilizer The Stabilizer function works according to the luminance of the target object. This function uses special image data processing for getting high sensitivity of CCD. High sensitivity can use higher shutter speed compared with normal mode, so it reduces influence of hand shaking. Press the stabilizer button before pressing the Shutter button.
AgfaPhoto OPTIMA 105 Using Flash When taking pictures in difficult lighting conditions, use the Flash button to get correct exposure. This function cannot be activated in recording videos or continuous shooting. To activate Flash: • Press the Flash/Right button on your camera...
AgfaPhoto OPTIMA 105 Using the Function Menu The Function Menu is used to adjust capture settings in Photo Mode. It contains My Mode, Photo Size, Quality, EV Compensation, White Balance, ISO, Metering, and Color Mode. Press the FUNC button of your camera to launch the Function Menu.
Page 23
AgfaPhoto OPTIMA 105 Quality The Quality sets the quality (compression) at which the image is captured. The quality determines the amount of compression applied to your images. Fine quality would give you the best images with sharper details and less compression. However, the higher the quality, the more memory space is required in your memory card.
AgfaPhoto OPTIMA 105 White Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. • As you move through the selection, you can see the preview on the LCD monitor synchronously.
AgfaPhoto OPTIMA 105 Metering This sets the metering method for calculating the exposure. Icon Item Description Multi The entire area of the screen is measured, and the exposure is calculated. Averages the light metered from the entire frame, but gives greater weight Center to the subject matter at the center.
AgfaPhoto OPTIMA 105 Using the Record Menu If you are in Photo Mode, you can access the Record menu simply by pressing the MENU button on your camera. When the menu is displayed, use the 4-way navigation control and the SET button to move through menu selections and apply your desired settings.
Page 27
AgfaPhoto OPTIMA 105 The table below shows the available scene mode settings. Icon Item Description The simplest way to shoot basic images. Settings are adjusted Auto automatically. The camera automatically adjusts suitable shooting settings like shutter Program speed and aperture values.
Page 28
AgfaPhoto OPTIMA 105 Building This feature enhances the edges of captured images. This feature enhances the black and white contrast normally used when Text capturing text images. Foliage This feature boosts the saturation of greens to give a rich color to foliage.
Page 29
AgfaPhoto OPTIMA 105 Using Intelligent Scene This feature is most useful for novice users to capture great images even without basic knowledge of photography. Simply frame the shot with the help of Intelligent Scene Mode, the camera automatically recognizes 11 kinds of scenes - Portrait, Landscape, Sunset, Macro, Text, Snow, Backlight, Backlight Portrait, Night Scene, Night Portrait and Foliage - and selects the ideal settings.
Page 30
AgfaPhoto OPTIMA 105 Using Party Mode Let the party mode on! It can be difficult to get everyone on a party. While you have the whole gang together, take a group or family portrait. Party mode features on Red-eye reduction flash and face tracking.
Page 31
AgfaPhoto OPTIMA 105 5. Press SET button to continue the second shot. 6. Or, press Menu button to go back the first shot. 7. Repeat step 4 to 6, until the pattern is filled in images. 8. Press SET button to save the composed image.
AgfaPhoto OPTIMA 105 Using Smile Capture Mode When facing camera, especially kids, smiles are always short and hard to seize by manual shutter. Smile capture mode detects every smile all the time and performs Automatic Focus (AF) to capture an image without pressing Shutter button.
AgfaPhoto OPTIMA 105 3. Move your position until photographer confirm your whole or half body in the frame and in the right place. 4. Press the Shutter button. Camera stores the image produced by this step only. Using Love Portrait Want to take a good image when there are just two of you? All you have to do is hold the camera and show your smiles together.
AgfaPhoto OPTIMA 105 Using Shutter Priority Mode This mode is designed for capturing moving subjects. A faster shutter speed is required to freeze a motion (flying birds), while the slower shutter speed creates a sense of motion (water flowing). To set Shutter values 1.
AgfaPhoto OPTIMA 105 Setting the Drive Mode Your camera features a Self-timer and Burst which can be set in the Drive Mode function in the Record Menu. The Self-timer allows you to take images after a pre-defined delay. While burst lets you take consecutive shots. This function is only available in recording still images.
AgfaPhoto OPTIMA 105 Setting the AEB AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive images in the order of standard exposure, under exposure and overexposure compensation. To set AEB 1. From the Record menu, select AEB. 2. Use the keys to go through the selection.
AgfaPhoto OPTIMA 105 Setting Sharpness This function allows you to enhance or soften finer details of your images. To set Sharpness 1. From the Record menu, select Sharpness. 2. Use the keys to go through the selection. 3. Press the SET button to save and apply changes.
AgfaPhoto OPTIMA 105 Setting Contrast This function allows you to adjust the contrast of your images. To set Contrast 1. From the Record menu, select Contrast. 2. Use the keys to go through the selection. 3. Press the SET button to save and apply changes.
AgfaPhoto OPTIMA 105 Setting the Date Stamp The date of recording can be printed directly on the still images. This function must be activated before the image is captured. Once date and time are stamped on an image, they can no longer be edited or deleted.
AgfaPhoto OPTIMA 105 Settings of Recording Videos Press Function button to enable video setting menu before recording a video. Movie Size The Movie Size function appears only in Movie Mode. Use this function to adjust the resolution and quality of movie clips.
AgfaPhoto OPTIMA 105 Pre-Record You can catch the first three seconds of action you would have potentially missed. Once enable this function, the camera starts recording video automatically before pressing Shutter button. As soon as the Shutter button is hit, the most recent three seconds of video is added to the beginning of the clip.
AgfaPhoto OPTIMA 105 Viewing Thumbnails This function allows you to view 9-thumbnail images or by calendar mode on the LCD monitor at the same time. Searching numerous of images is much easier then single view navigation. To set 9-images mode 1.
AgfaPhoto OPTIMA 105 Zooming images The zoom view function works with still images only. • In normal view, spin the Zoom dial clockwise (right) repeatedly until the desired zoom view. • The 4 arrows on the LCD monitor indicate that the image is zoomed in.
AgfaPhoto OPTIMA 105 Playing Voice Recording 1. Set the camera to Playback Mode 2. Use the navigation controls to scroll through the saved images. When viewing a voice recording file, the LCD monitor displays the screen layout of Audio clips. See picture on the right.
AgfaPhoto OPTIMA 105 Deleting an Image/Video/Audio There are two ways to delete an image/video/audio: • Using the Delete button, or Using Playback Menu Delete settings. See "Delete" on page 45. • Using the Delete Button Use the Fn/Delete button on your camera to delete or mark an image/video/audio clip for deletion.
Page 46
AgfaPhoto OPTIMA 105 To change slideshow settings: 1. From the Slideshow menu, use the keys t to move through the selections. 2. Select Interval setting. Press the keys to adjust. Choose among the available interval settings: 1 sec., 3 sec., 5 sec., and 10 sec.
Page 47
AgfaPhoto OPTIMA 105 To delete multiple files: 1. Select Multi in the Delete submenu, the images are displayed in thumbnail view on the LCD monitor. 2. Use the navigation control to move through the files. 3. When the desired image/video/audio clip is highlighted, press the SET button to mark image/video/audio clip for deletion.
Page 48
AgfaPhoto OPTIMA 105 To protect/unprotect a single file: 1. Select Single in the Protect submenu, the images are displayed on the LCD monitor in single navigation mode. 2. Use keys to scroll the display. 3. When the desired file is displayed on the LCD monitor, select Lock/Unlock.
AgfaPhoto OPTIMA 105 Red-eye Correction The Red-eye Correction function is used to reduce red eye in captured images. This function is only available for still images. Red-eye correction can be applied to an image several times, but the quality may gradually deteriorate.
Page 50
AgfaPhoto OPTIMA 105 Color Mode The Color Mode function lets you adjust edit still images to apply different colors or tones for a more artistic effect. Edited images in this function are saved as a new file. To activate Color Mode: 1.
Page 51
AgfaPhoto OPTIMA 105 Trim The Trim function allows you to trim an image to another image size. This function is only available for still images. To trim an image: 1. Set the camera to Playback Mode 2. Use the keys to scroll and select an image to trim.
AgfaPhoto OPTIMA 105 Resize Resizes a previously saved image and only resizing to a smaller size is available. To resize an image: 1. Set the camera to Playback Mode 2. Use the keys to scroll and select an image to resize.
AgfaPhoto OPTIMA 105 DPOF DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer.
AgfaPhoto OPTIMA 105 Using the Setup Menu You can access the Setup menu whether you are in Record or Playback Mode. The Setup menu allows to configure general camera settings. To go to Setup Menu: 1. Press Menu button to launch the Record/Playback Menu.
AgfaPhoto OPTIMA 105 Setting LCD Save Enable the LCD Save function to automatically decrease the LCD brightness to conserve battery power. When the camera is idle for 20 seconds, the LCD darkens. Press any button to resume to normal brightness.
AgfaPhoto OPTIMA 105 Setting TV Out Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV out is not set correctly, the image may not display properly on TV. Available settings are: • NTSC. Applicable in Japan, USA, Canada, Taiwan and others.
AgfaPhoto OPTIMA 105 Reset All Use this function to reset the camera to its factory settings. However, the following settings are exceptions and not affected by Reset. • Date & Time • Language • TV Out • Custom White Balance data Making Connections You can connect your camera to: TV, computer, or a printer.
Page 58
AgfaPhoto OPTIMA 105 4. The USB Mode menu appears on the screen. Select Computer by using the key and press the SET button. 5. The PC starts to detect the connection while the LCD monitor appears Connecting… 6. Connection established after PC Mode appeared on the LCD monitor 7.
AgfaPhoto OPTIMA 105 Connecting the Camera to a Printer You can print your images directly using a PictBridge compatible printer. 1. Turn on your Printer. Check that the printer is turned on, there is paper in the printer, and there are no printer error messages.
Page 60
AgfaPhoto OPTIMA 105 To set Printer Settings 1. Use the key to specify a print option. 2. Modify paper size and quality by the keys. Available setting: • Paper size: Default / A4 / 4"x6" • Quality: Default / Fine / Normal 3.
AgfaPhoto OPTIMA 105 Appendix About Folder and File Names Your camera automatically creates specific directory of folder in the internal memory cards to organize captured images, videos and audio files. File Naming File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created.
MK10 9RG United Kingdom AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co KG nor Agfa-Gevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. All other brands and product names are registered trademarks of their respective owners.
Page 64
AgfaPhoto is used under license of Agfa-Gevaert NV & Co. KG or Agfa-Gevaert NV. Neither Agfa-Gevaert NV & Co. KG nor Agfa-Gevaert NV manufacture this product or provide any product warranty or support. For service, support and warranty information, contact the distributor or manufacturer. For service, support and warranty information, contact the distributor or manufacturer. All other brands and product names are registered trademarks of their respective owners.